BEECO on MIFAB

Access DoorsBackwater ValvesBEECOC-PORT Roof
Pipe SupportsCounterline and Other Products Fabricated Stainless
Steel DrainsFixture Carriers Floor and Area Drains Floor and Wall Cleanouts Floor SinksGrease, Oil and
Specialty InterceptorsNo Hub Couplings Rain Water Harvesting Roof DrainsTrap Seal Primers and
Water Hammer ArrestorsTrench Drains Wall and Ground Hydrants


All Categories > BEECO


	BEECO
	Click on a Product to view details.

ACV

(49)

Click for specsheet

List Prices

Specification: The Automatic Control Valve shall be a Ductile Iron Body and Cover design. The Valve shall have a resilient seal disc, guided top and bottom; Bottom guide will be vanes, sliding in a stainless steel seat arrangement, single seated line pressure operated, diaphragm actuated, pilot controlled, valve. The valve shall seal by means of a stainless steel seat. All parts are to be replaceable in the field without removing the valve from the line. All flange ...

ACV-HF

(70)

Click for specsheet

List Prices

ACV-UL-HF

(35)

Click for specsheet

List Prices

AG

(4)

Click for specsheet

List Prices

Specification: Beeco Air Gaps are custom made to fit onto the relief valves of all Beeco Friendly Reduced Pressure Backflow devices.

Function: Beeco Air Gaps provides the unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel.

Features: The Beeco Air Gaps are easily attached and can be either factory installed or added in the field after valve installation.

Material: ...

ASVB

(8)

Click for specsheet

List Prices

Specification: The Anti-Siphon Vacuum Breaker is designed to prevent the cross contamination through back siphonage of contaminated water. These devices should be installed according to local code and building plans by a licensed professional. This device is not to be used under continuous pressure or where there is a possibility of a back pressure condition.

Ratings: Maximum Temperature 180°F (82°C); Maximum Working Pressure ...

BE

(4)

List Prices

BV

(72)

Click for specsheet

List Prices

Specification: The Beeco Full Port Ball Valve is a two piece Bronze Ball Valve with a chrome plated ball. The valve has a blow out proof stem with adjustable packing. Its full port design eliminates the significant pressure losses caused by standard reduced port valves.

Function: The Beeco Full Port Ball Valve is used in commercial and industrial applications on a wide variety of liquids and gases. Features: Each valve is ...

CV

(8)

Click for specsheet

List Prices

Specification: The Beeco® Silent Check Valve is designed to reduce water hammer while performing all the same requirements of a swing check valve. The Sweat Version is designed to solder into lines without disassembly; a low temperature solder should be used in order to eliminate damage to the seating surface.

Ratings:
Maximum Working Pressure 400 psi (27.6 bars); Temperature Rating –20° to 100° F (-29° C to ...

DC

(16)

Click for specsheet

List Prices

Specification: The BEECO In Line Double Check Valve prevent the reverse flow of polluted water from entering into the drinking water supply. It is designed to be used in either the horizontal or vertical position and should be placed at the service entrance or can be used as a point of use device. This device is designed for continuous pressure applications in non-health hazard residential water system containment. It should be installed right after the water ...

DU

(12)

Click for specsheet

List Prices

Specification: The Dielectric Union shall be rated for 250 psi (ANSI B 16.39). The body and nut shall be steel with galvanized coat, the gaskets shall be EPDM, the insulator shall be nylon, and the tailpiece shall be brass.

Function: BEECO Style DU Dielectric Union Series is designed for installation and use on potable water lines. A dielectric union should be installed between pipes made of dissimilar metals to prevent the rapid ...

FDC [1/2"-2"]

(60)

List Prices

Click for specsheet

FDC [2 1/2"-10"]

(66)

Click for specsheet

List Prices

Specification: The BEECO Friendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed.

Function: The assembly shall ...

DCDA

(24)

Click for specsheet

List Prices

Specification:The BEECO Friendly Double Check Detector Assembly is designed to stop the reverse flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed.

Function:The assembly shall consist of two repairable positive seating check ...

Repair Kits for FDC Backflow Preventers

(14)

Replacement Checks for 1/2" - 2" models	Replacement Checks for 2 1/2" - 10" models	Rubber Kits for 1/2" - 2" models
Rubber Kits for 2 1/2" - 10" models

FRP [1/2"-2"]

(60)

Click for specsheet

List Prices

Specification: The BEECO Friendly Reduced Pressure Zone Backflow Preventer is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1013, CSA B64.4 and IAPMO listed.

Function: The assembly shall consist ...

FRP [2 1/2"-10"]

(66)

Click for specsheet

List Prices

Specification: The BEECO Friendly Reduced Pressure Zone Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015. Is Certified to cUPC and IAPMO listed.

Function: The ...

RPDA

(24)

Click for specsheet

List Prices

Specification:The BEECO Friendly Reduced Pressure Zone Backflow Detector Preventer Valve is designed to stop the reverse flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, Is Certified to cUPC and IAPMO listed.

Function:The assembly shall consist of two ...

Repair Kits for FRP Backflow Preventers

(22)

Replacement Checks for 1/2" - 2" models	Replacement Checks for 2 1/2" - 10" models	Rubber Kits for 1/2" - 2" models
Rubber Kits for 2 1/2" - 10" models

Repair Kits [Old Style Hersey BEECO]

(31)

List Prices

GV-FXF-NRS

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-FXF-NRS is a Flanged by Flanged Gate Valve. They feature a non-rising stem for compact areas, they feature an epoxy-coated, cast iron body, all flange dimensions comply with ANSI B16.1, they have resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 230 psi (16 bar) CWP. Valves comply with AWWA C515 standard.

Function: Used in irrigation and ...

GV-FXG-NRS

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-FXG-NRS is a Flanged by Grooved Gate Valve. They feature a non-rising stem for compact areas, they feature an epoxy-coated, cast iron body, all flange dimensions comply with ANSI B16.1, all grooved dimensions comply with AWWA C606, they have resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 230 psi (16 bar) CWP. Valves comply with AWWA C515 ...

GV-GXG-NRS

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-GXG-NRS is a Grooved by Grooved Gate Valve. They feature a non-rising stem for compact areas, they feature an epoxy-coated, cast iron body, all grooved dimensions comply with AWWA C606 they have resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 230 psi (16 bar) CWP. Valves comply with AWWA C515 standard.

Function: Used in irrigation,and ...

GV-FXF-OSY

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-FXF-OSY is a Flanged by Flanged Gate Valve. They feature an epoxy-coated, cast iron body, all flange dimensions comply with ANSI B16.1, they have resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Valves comply with AWWA C515 standard. Maximum Pressure: 230 psi (16 bar) CWP.

Function: Used in irrigation and water distribution. The BEECO Series GV-FXF-OSY is ...

GV-FXG-OSY

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-FXG-OSY is a Flanged by Grooved Gate Valve. They feature an epoxy-coated, cast iron body, all flange dimensions comply with ANSI B16.1, all grooved dimensions comply with AWWA C606, they have resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 230 psi (16 bar) CWP. Valves comply with AWWA C515 standard.

Function: They are used in irrigation ...

GV-GXG-OSY

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-GXG-OSY is a Grooved by Grooved Gate Valve used in irrigation and water distribution. They feature an epoxy-coated, cast iron body, all grooved dimensions comply with AWWA C606 they have resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 230 psi (16 bar) CWP. Valves comply with AWWA C515 standard

Function: Used in irrigation and water ...

GV-FXF-UL/FM

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-FXF-UL/FM-OSY is a Flanged by Flanged Gate Valve. They are UL/FM approved and comply with SP-70. Cast iron body is epoxy-coated with ANSI B16.1 flanged connections, resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 300psi (21 bar) CWP.

Function: Used in fire protection as fire main shutoff valves and water distribution. The BEECO Series ...

GV-FXG-UL/FM

(6)

Click for specsheet

List Prices

Specification: BEECO Series GV-FXG-UL/FM-OSY is a Flanged by Grooved Gate Valve with UL/FM approved and comply with SP-70. Cast iron body is epoxy-coated with ANSI B16.1 flanged connections, resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 300psi (21 bar) CWP.

Function: Used in fire protection as fire main shutoff valves and water distribution. The BEECO Series ...

GV-GXG-UL/FM

(6)

Click for specsheet

List Prices

Specification: Beeco Series GV-GXG-UL/FM-OSY is a Grooved by Grooved Gate Valve with UL/FM approved and comply with SP-70. Cast iron body is epoxy-coated with ANSI B16.1 flanged connections, resilient wedge disc, cast iron bonnet, a stainless steel stem and cast iron handwheel. Maximum Pressure: 300psi (21 bar) CWP.

Function: Used in fire protection as fire main shutoff valves and water distribution. The Beeco Series ...

HBVB

(2)

Click for specsheet

List Prices

Specification: Designed for installation on potable water lines such as service sinks, laundry tubs and hose bibbs to protect against back-siphonage of polluted water into the potable water supply. Assembly shall provide protection where a potential health hazard does not exist.

Function: A Hose Connection Vacuum Breaker is designed to prevent the back-siphonage of contaminated water. This device is designed to meet ASSE 1011 and CSA B ...

JK

(28)

Click for specsheet

List Prices

Specification: Jumper Kits are used in new construction to temporarily take the place of your BEECO Pressure Reducing Valve, prior to the actual installation on potable water supply systems. The use of a this BEECO jumper permits testing of the building piping system for leaks and pressure loss and allows for flushing or construction debris prior to the installation of the water pressure reducing valve. The jumper kit reduces loss from theft or vandalism in area ...

MI-CONTROL

Click for specsheet

List Prices

Specification: The BEECO MI-Control is designed to be used where a water heater shut-off and thermal expansion relief valve are needed in combination to provide protection for your plumbing system against thermal expansion.

Function: Water heater shutoff/thermal expansion control valve is manufactured to control thermal expansion in a closed plumbing system and also for residential water heater applications where a water ...

PG

(20)

Click for specsheet

List Prices

Specification: BEECO Pressure Gauges are designed for use in residential, commercial, industrial and HVAC applications. Accuracy to ASME type B with a copper alloy NPT connection in various sizes and ratings.

Function: The BEECO Model Pressure Gauges are used for all suitable air and liquid systems for medium which does not clog connection ports or corrode copper alloy. Can be used in all water applications and can be used in both pneumatic ...

PRV-C [1/2"-1"]

(24)

Click for specsheet

List Prices

Specification: A Water Pressure Reducing Valve with a built in strainer shall be installed in the incoming water line where supply main pressure exceeds 60psi (413 kPa). The Pressure Reducing Valve shall consist of a bronze body and metal cap, and shall have an adjustment screw to allow adjusting the pressure down to 50PSI (345 kPa), and shall be designed for incoming pressures up to 300 PSI (20.7 bar). The device must have a built in strainer ...

PRV-C [1 1/4"-2"]

(24)

Click for specsheet

List Prices

PRV-F [1/2"-1"]

(24)

Click for specsheet

List Prices

Specification: A Water Pressure Reducing Valve with a built in strainer shall be installed in the incoming water line where supply main pressure exceeds 60psi (413 kPa). The Pressure Reducing Valve shall consist of a bronze body and metal cap, and shall have an adjustment screw to allow adjusting the pressure down to 50psi (345 kPa), and shall be designed for incoming pressures up to 300 PSI (20.7 bar). The device must have a built in strainer that will stop ...

PVB

(12)

Click for specsheet

List Prices

Specification: Anti-Siphon Pressure Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. Designed to stop contaminated water from entering into the potable water supply. . Designed for use under continuous pressure. Assembly shall provide protection where a potential health hazard exists. It shall consist of bronze body construction, plastic check valve seat, stainless steel springs, a ...

RPC

(10)

Click for specsheet

List Prices

Specification: BEECO Style RPC Rigid Pipe Couplings provide a zero-flexibility combination of the piping system. The angle-pad design of 60 degrees adjust to steel pipes and roll/cut groove tolerances, positively clamping the pipe to resist flexural and torsion loads. Angle pad design and swing-over installation permit assembly by removing one nut/bolt and swinging housing over gasket, reducing assembly time and effort.

Function: Used in ...

SP

(6)

Click for specsheet

List Prices

Specification: Beeco Spools and Spacers are custom made to retrofit into existing field installations where a shorter length valve is being installed.

Function: Beeco Spools and Spacers are designed for retrofitting backflow prevention assemblies, Automatic Control Valves or other piping system installations into spaces where a longer lay length exists. Spools are available in fused bonded epoxy coated carbon steel and come standard with ...

STR

(24)

Click for specsheet

List Prices

Specification: The “Y” type strainer shall be a bronze body strainer with a brass cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line.

Ratings:
Maximum Working Pressure: 400 P.S.I. (27.6 bar) WOG ...

STR-DI

(7)

Click for specsheet

List Prices

Specification: The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

Ratings:
Working Pressure 125 ...

STR-PC

(7)

Click for specsheet

List Prices

Specification: The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug and will have an FDA approved epoxy coating inside and out. The integral strainer screen shall be accessible for cleaning without removing the device from the ...

TK

Click for specsheet

List Prices

Specification: Gauge Type: Diaphragm Differential Pressure, Differential Pressure Accuracy: ±0.2 P.S.I.D. (Descending), Working Pressure: 200 P.S.I.G.

Function: The BEECO test Kit is a compact portable device made for testing , reduced pressure zone assemblies, and double check valve assemblies, pressure vacuum breakers and anti-spill vacuum breakers. Temperature Limitations: Maximum 150°F/65°C. FREEZING TEMPERATURES MUST BE ...