Fixture Carriers on MIFAB

Access DoorsBackwater ValvesBEECOC-PORT Roof
Pipe SupportsCounterline and Other Products Fabricated Stainless
Steel DrainsFixture Carriers Floor and Area Drains Floor and Wall Cleanouts Floor SinksGrease, Oil and
Specialty InterceptorsNo Hub Couplings Rain Water Harvesting Roof DrainsTrap Seal Primers and
Water Hammer ArrestorsTrench Drains Wall and Ground Hydrants


All Categories > Fixture Carriers


	Fixture Carriers
	Click for Fixture Carriers Introduction

	Click on a Product to view details.


		MC-10 Series - Horizontal Adjustable Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10 single, horizontal, adjustable water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed, adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts, and rear ...




		MC-10-HD Series - Heavy Duty Horizontal Adjustable Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10-HD (specify -L for left, -R for right design, or -D for double design) single, horizontal, adjustable, water closet carrier for 500lb load rating with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed, adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl ...




		MC-10-HDX 1000lb . (454kg) Carrier Support Click for specsheet List Prices Specification: MIFAB Series MC-10-HDX, 1000lb. Carrier Support complies with all applicable requirements of ASME A112.6.1M up to a 1000lb. (454kg) load. This support is used in concert with the standard lacquered cast iron adjustable faceplate, lacquered cast iron waste fitting, adjustable ABS nipple, hardware and finishing kit. Function: Used to provide additional support capability in excess of standard carrier loading. The -HDX option ...




		MC-10D Series - Horizontal Adjustable Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10D double, horizontal, adjustable water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, and polished chrome plated finishing cap nuts.




		MC-10-EXT Series - Horizontal Adjustable Water Closet Carrier for ADA Height Water Closets in Middle of Battery Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10-EXT (Specify L for left or R for right design) single, horizontal, adjustable, high rough-in water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed, adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded ...




		MC-10D-EXT Series - Double Horizontal Adjustable Water Closet Carrier for ADA Height Water Closets in Middle of Battery Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10D-EXT double, horizontal, adjustable, high rough-in water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed, adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, and polished chrome ...




		MC-10-27 Series - Horizontal Adjustable Water Closet Carrier with Aux.2" Inlet Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10-27 (Specify L for left or R for right design) single, horizontal, adjustable, water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, 2" (51) no hub auxiliary inlet connection, lacquered cast gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, ...




		MC-10D-27 Series - Double Horizontal Adjustable Water Closet Carrier with Aux.2" Inlet - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10D-27 double horizontal adjustable water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron face plates and ductile iron foot supports, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware, and polished cap nuts.




		MC-10-27-36 Series - Horizontal Adjustable Water Closet Carrier with Aux.2" Inlet & Barrel Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10-27-36 (Specify L for left or R for right design) single, horizontal, adjustable, water closet carrier with lacquered, 36" (914) long barrel cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, 2" (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with ...




		MC-10D-27-36 Series - Double Horizontal Adjustable Water Closet Carriers with Aux.2" Inlet & Barrel - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-10D-27-36 double, horizontal, adjustable water closet carrier with lacquered with 36" (914) long barrel cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, 2" (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable face plates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl ...




		MC-12 Series - Vertical Adjustable Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-12 single, vertical, adjustable water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts, and read ...




		MC-12D Series - Double Vertical Adjustable Water Closet Carrier - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-12D double, vertical, adjustable water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, and polished chrome plated finishing cap nuts.




		MC-13 Series - Vertical Adjustable Water Closet Carrier with One or Two Side Inlets Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-13 single, vertical, adjustable, water closet carrier with lacquered cast iron fitting, left, right or both (specify) 4" (102) side inlets, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome ...




		MC-13D Series - Double Vertical Adjustable Water Closet Carrier with One or Two Side Inlets - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-13D double, vertical, adjustable closet carrier with lacquered cast iron fitting, left, right or both (specify) 4" (102) side inlets, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, and polished ...




		MC-14 Series - Fixed Vertical On-stack Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-14 single, vertical, fixed water closet carrier with lacquered cast iron fitting, 3" (76) or 4" (102) no hub waste (specify), and 2" (51) or 4" (102) no hub vent connection (specify), lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap ...




		MC-15 Series - Fixed Vertical Water Closet Carrier Offset From Stack Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-15 single, vertical, fixed, water closet carrier with offset lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts, and rear anchor tie down ...




		MC-15D Series - Double Fixed Vertical Water Closet Carrier Offset From Stack - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-15D double, vertical, fixed water closet carrier with offset lacquered cast iron fitting, 4" (102) no hub waste and 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, and polished chrome plated finishing cap nuts.




		MC-21 Series - Compact Rear Outlet Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-21 floor mounted single, horizontal, adjustable water closet carrier without fitting, 4" (102) back outlet waste connection (specify no hub or threaded), lacquered cast iron adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts, and rear ...




		MC-24 Series - Residential Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-24 residential water closet carrier with lacquered cast iron finish, 3" (76) PVC adapter, mounting hardware, threaded rod protectors, and polished chrome plated finishing cap nuts.




		MC-25 Series - Residential Water Closet Carrier Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-25 residential water closet carrier system with lacquered cast iron no hub fitting (specify size and style), lacquered cast iron faceplate, mounting hardware, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, and polished chrome plated finishing cap nuts.




		MC-26 Series - Single Stack Fitting for Floor Mounted Back Outlet Water Closet Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-26 water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts, and side anchor tie down support.




		MC-27 Series - 90 Degree Double Stack Fitting for Floor Mounted Back Outlet Water Closet Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-27 water closet carrier with lacquered cast iron 90 degree double no hub stack fitting with 4" (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8" ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts, and side anchor tie down supports.




		MC-28 Series - 90 Degree Double No-Hub Stack Fitting for Floor Mounted Back Outlet Water Closet Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-28 lacquered cast iron 90 degree double no hub stack fitting with 4" (102) no hub waste, 2" (51) no hub center vent connection, and anti-crossover baffles for floor mounted back outlet water closets.




		MC-31 Series - Single Hanger Plate Carrier with Two Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-31 single lavatory hanger plate carrier with universal, adjustable top support plate. Complete with lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-31D Series - Double Hanger Plate Carrier with Two Uprights - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-31D back to back, lavatory hanger plate carrier with universal, adjustable, top support plates. Complete with lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-32 Series - Double Plate Type Carrier System with 2 Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-32 hanger plate carrier with universal, adjustable, top support plate and bottom bearing plate. Complete with lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-32D Series - Double Plate Type Carrier System with 2 Uprights - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-32D hanger plate carrier with universal, adjustable top support plates and bottom bearing plates. Complete with lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-33 Series - Single Hanger Plate Carrier with Three Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-33 hanger plate carrier with two universal, adjustable, top support plates. Complete with three lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel and mounting hardware.




		MC-33-2 Series - Single Hanger Plate Carrier with Three Uprights and Two Bottom Bearing Plates Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-33-2 hanger plate carrier with two universal, adjustable top support plates and bottom bearing plate. Complete with three lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-34 Series - Single Hanger Plate Carrier with Exposed Arms Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-34 single hanger plate and exposed arm lavatory carrier with universal, adjustable, top support plate and white, lacquered, adjustable, cast iron exposed support arms assembled to lacquered cast iron invertible and adjustable arm supporting brackets. Complete with two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-34D Series - Double Hanger Plate Carrier with Exposed Arms - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-34D back to back hanger plate and exposed arm lavatory carrier with two universal, adjustable, top support plates and four white, lacquered, adjustable, cast iron exposed support arms assembled to lacquered cast iron invertible and adjustable arm supporting brackets. Complete with two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-35 Series - Hanger Plate Carrier with 3 Uprights and Exposed Arms Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-35 hanger plate and exposed arm lavatory carrier with two universal, adjustable, top support plates and three white, lacquered, adjustable, cast iron exposed support arms assembled to lacquered cast iron invertible and adjustable arm supporting brackets. Complete with three lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-36 to MC-39D Series - Wall Supported Fixture Mounting Plates Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-36, 22" x 4" lacquered steel plate with universal slots and six pieces of 1/4-20 x 8" long all threaded plated mounting studs, with nuts and washers. SPECIFICATION: MIFAB Series MC-36-2, 22" x 4" top lacquered steel plate, with universal slots and six pieces of 1/4-20 x 8" long all threaded plated mounting studs, and 22" x 2" bottom bearing plate with slots and two pieces of 5/16 x 10" ...




		MC-40 Series - Fixture Carrier with Exposed Arms Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-40 floor mounted exposed arm lavatory carrier with white, lacquered, adjustable cast iron exposed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and mounting hardware.




		MC-40D Series - Double Fixture Carrier with Exposed Arms - Back to Back Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-40D floor mounted exposed arm lavatory carrier with back to back white, lacquered, adjustable cast iron exposed support arms. Complete with back to back lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and mounting hardware.




		MC-41 Series - Fixture Carrier with Concealed Arms Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-41 floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet and fixture leveling and locking hardware.




		MC-41D Series - Back to Back Fixture Carrier with Concealed Arms Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-41D floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and fixture leveling and locking hardware.




		MC-41-R Series - Fixture Carrier with Concealed Arms and Round Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-41-R floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2" diameter x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and fixture leveling and locking hardware.




		MC-41D-R Series - Back to Back Fixture Carrier with Concealed Arms and Round Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-41D-R floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2" diameter 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and locking hardware.




		MC-41-TR Series - Fixture Carrier with Concealed Arms and Measuring Plates List Prices




		MC-42 Series - Fixture Carrier with Concealed Arms for ADA Lavatories Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-42 floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and fixture leveling and locking hardware.




		MC-42D Series - Back to Back Fixture Carrier with Concealed Arms for ADA Lavatories Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and fixture leveling and locking hardware.




		MC-42-R Series - ADA Lav Carrier with Concealed Arms and Round Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-42-R floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and fixture leveling and locking hardware.




		MC-42D-R Series - Back to Back Ada Fixture Carrier with Concealed Arms and Round Uprights Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-42D-R floor mounted back to back concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and fixture leveling and locking hardware.




		MC-51 Series - Concealed Arms with Adjustable Plate Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-51 wall mounted concealed arm lavatory carrier with lacquered, adjustable ductile iron concealed support arms. Complete with lacquered cast iron adjustable wall plate, adjustable steel nipples with locknut and set screws, and fixture leveling and locking hardware.




		MC-51-LP Series - Concealed Arms Only (One Set Is Two Arms) Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-51-LP lacquered, adjustable ductile iron concealed support arms with locknut, set screws, and fixture leveling and locking hardware.




		MC-53 Series - Concealed Arms with Adjustable Plate and Backing Plates Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-53 wall mounted concealed arm lavatory carrier with lacquered, adjustable ductile iron concealed support arms. Complete with lacquered cast iron adjustable wall plate, backing plates, adjustable steel nipples with locknut and set screws, and fixture leveling, locking and mounting hardware.




		MC-54 Series - Wall Mounted Lavatory Support with Concealed Arms Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-54 wall mounted concealed arm lavatory carrier with lacquered, adjustable ductile iron concealed support arms. Complete with lacquered cast iron adjustable wall plate, backing plates, adjustable steel nipples with set screws, and fixture leveling, locking and hardware.




		MC-55 Series - Exposed Arms with Adjustable Surface Plate and Back Mounting Plates Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-55 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs, backing plates, and fixture leveling hardware.




		MC-56 Series - Exposed Arms with Adjustable Surface Plate Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-56 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs and fixture leveling hardware.




		MC-56-LP Series - Exposed Arms, Less Plate Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-56-LP exposed arms for wall mounted lavatory with white, lacquered, adjustable, cast iron exposed support arms. Complete with fixture leveling and mounting hardware.




		MC-61 Series - Floor Mounted Service Sink Carrier Without Fitting Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-61 floor mounted service sink carrier with two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and back outlet waste connection (specify threaded or no hub waste connection). Complete with lacquered cast iron faceplate assembly, lacquered cast iron nipple and waste connector, adjustable 8" tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, ...




		MC-62 Series - Floor Mounted Service Sink Carrier with Fitting Click for specsheet List Prices Part Number Configurator SPECIFICATION: MIFAB Series MC-62 floor mounted service sink carrier with two lacquered 2" x 1" x 1/8" thick structural steel uprights with 3" x 4-1/2" welded steel feet, and lacquered cast iron fitting, with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8" tapered ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, and polished ...