Counterline and Other Products on MIFAB

Access DoorsBackwater ValvesBEECOC-PORT Roof
Pipe SupportsCounterline and Other Products Fabricated Stainless
Steel DrainsFixture Carriers Floor and Area Drains Floor and Wall Cleanouts Floor SinksGrease, Oil and
Specialty InterceptorsNo Hub Couplings Rain Water Harvesting Roof DrainsTrap Seal Primers and
Water Hammer ArrestorsTrench Drains Wall and Ground Hydrants


All Categories > Counterline and Other Products


	Counterline and Other Products
	Click on a category to drill down.


		CF - Cast Iron Closet Flanges with Gasket Connection (6) Click for specsheet List Prices MIFAB CL Series lacquered cast iron closet flange with mounting holes, stainless steel hardware, and neoprene rubber gasket for waste connection.




		C230-TS - Cleanout Cover with Thumbscrews for 2"-4" Pipe Size Click for specsheet List Prices MIFAB Series C230-TS Adjustable floor cleanout cover with lacquered cast iron body, scoriated cover with stainless steel vandal proof allen key screws and three anchoring set screws.




		R150 - Cast Iron Combined Roof Drains with Aluminum Domes and Overflow Standpipe Click for specsheet List Prices




		50-SD - Shower Sub Drains with Cast Iron Body and Fixed Stainless Steel Strainer (7) Click for specsheet List Prices




		C300 - Floor Access Covers List Prices




		Drain and Cleanout Tops (9)




		Drain Bodies (24) 1/2" Trap seal primer tapping and plug included for no extra cost.




		FD210C - Heavy Duty Shower Floor Drain List Prices Heavy duty shower drain with lacquered cast iron body, membrane clamp, and standard chrome plated strainer, or optional polished brass top.




		FD230 - Light Duty Floor Drain List Prices Light duty floor drain with PVC, ABS, or lacquered cast iron body, and 5" diameter ductile iron or nickel bronze grate.




		FD230-WF - Wood Deck Floor Drains List Prices Floor drain with 1 1/2" securing flange for wood floors, PVC, ABS, or lacquered cast iron body, and 5" diameter frame and grate.




		FD240 - Heavy Duty Floor Drains (3) List Prices Heavy duty lacquered cast iron with 6 1/2" diameter. 1/2" thick ductile iron.




		F650 - Cast Iron 14" Round Deck Drains with 6 1/2" Diameter Nickel Bronze Frame and Grate (5) List Prices




		FD-9600 Snap In Grates (3) Click for specsheet List Prices MIFAB Series FD-9602 polished type #304 stainless steel insert floor drain that fits firmly on the inside diameter of all types of pipe 2" (51) through 4" (102).




		Cast Iron Floor Sinks




		PVC Floor Sinks




		HY-1000 Series Non Freeze Wall Hydrants Click for specsheet List Prices The HY-1000 Series hydrants feature a combination 3/4" SWT. and 1" M.I.P. inlet connection that swivels 360º to any position for easy connection to the water supply. The swivel connection can be removed for a straight back 3/4" SWT. inlet connection. MIFAB Series HY-1000 A.S.S.E. 1019-B certified exposed type, self draining, non freeze wall hydrant with A.S.S.E 1011 approved anti siphon and vandal resistant integral vacuum breaker with a 3/4" (19) male hose connection. ...




		HY-2000 Series Encased Non Freeze Wall Hydrants Click for specsheet List Prices The HY-2000 Series hydrants feature a combination 3/4" SWT. and 1" M.I.P. inlet connection that swivels 360º to any position for easy connection to the water supply. The swivel connection can be removed for a straight back 3/4" SWT. inlet connection. MIFAB Series HY-2000 A.S.S.E. 1019-B certified encased type, self draining, non freeze wall hydrant with A.S.S.E 1011 approved anti-siphon and vandal resistant integral vacuum breaker with a 3/4" (19) male hose connection. ...




		HY-3000 Series Moderate Climate Wall Hydrant Click for specsheet List Prices Moderate Climate Wall Hydrant with 3/4" F.I.P. and 1" M.I.P. Water Supply Inlet Connection. MIFAB Series HY-3000 exposed type, self draining, moderate climate wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with a 3/4" (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting, and polished ...




		HY-3500 Series Encased Moderate Climate Wall Hydrant Click for specsheet List Prices Encased Moderate Climate Wall Hydrant with 3/4" F.I.P. and 1" M.I.P. Water Supply Inlet Connection Recommended Wall Opening 5-1/4" x 6-1/4", 1-1/2" Overall Box Depth. MIFAB Series HY-3500 encased type, self draining, moderate climate wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated ...




		HY-4000 Series Hot and Cold Commercial Non-freeze Wall Hydrants Click for specsheet List Prices Hot and Cold Commercial Non-freeze Wall Hydrant with 1" M.I.P. and 3/4" SWT. water supply inlet connection.




		HY-4500 Series Encased Hot and Cold Commercial Non Freeze Wall Hydrants Click for specsheet List Prices Encased Hot and Cold Commercial Non Freeze Wall Hydrant with 1" M.I.P. x 3/4" SWT. Water supply inlet connection recommended wall opening 7-5/8" x 5-3/4", 3-5/8" overall box depth.




		HY-5000 Series Narrow Wall Moderate Climate Wall Hydrant Click for specsheet List Prices The HY-5000 Series hydrants feature a combination 3/4" SWT. and 1" M.I.P. inlet connection that swivels 360º to any position for easy connection to the water supply. MIFAB Series HY-5000 self draining, moderate climate narrow wall hydrant with A.S.S.E. 1011 certified anti-syphon vandal resistant vacuum breaker. Operating key furnished with each hydrant.




		HY-5500 Series Encased Narrow Wall Moderate Climate Wall Hydrant Click for specsheet List Prices Encased Narrow Wall Moderate Climate Wall Hydrant Recommended Wall Opening 5-1/4" x 6-1/4", 3-15/16" Overall Depth. The HY-5500 Series hydrants feature a combination 3/4" SWT. and 1" M.I.P. inlet connection that swivels 360º to any position for easy connection to the water supply. MIFAB Series HY-5500 encased self draining, moderate climate narrow wall hydrant with A.S.S.E. 1011 certified anti-siphon vandal resistant vacuum breaker. Operating key furnished with ...




		HY-6000 Series Ground / Lawn Hydrant with Nickel Bronze Enclosure Box Click for specsheet List Prices MIFAB Series HY-6000 A.S.S.E. 1019-B approved self draining, non-freeze, lawn/ground hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with a 3/4" (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty galvanized steel pipe, heavy duty chrome plated bronze head casting, polished chrome ...




		HY-6500 Series Post Hydrants (7) Click for specsheet List Prices MIFAB Series HY-6500 Non freeze post hydrant with exposed bronze head and combination 3/4" (19) female and 1" (25) male inlet connection. Hydrant assembly complete with one piece neoprene plunger, hardened bronze operating stem, 1" (25) galvanized steel casing, heavy duty bronze head casting with head nut assembly, 3/8" (9) diameter galvanized steel operating rod, tapped 1/8" (3) drain port in the bronze tailpiece, and an operating key.




		HY-6800 Series Yard Hydrants Click for specsheet List Prices MIFAB Series HY-6800 Non-freeze yard hydrant with heavy duty cast iron head casting and lift handle with lock feature and combination 3/4" (19) female and 1" (25) male inlet connection. Hydrant assembly complete with one piece neoprene plunger, hardened bronze operating stem, 1" (25) galvanized steel casing, heavy duty bronze head casting with head nut assembly, 3/8" (9) diameter galvanized steel operating rod, and a tapped 1/8" (3) drain port in the bronze tailpiece.




		HY-9000 Series Rough Brass Wall Faucets with Vacuum Breaker (8) Click for specsheet List Prices MIFAB Series HY-9000 exposed type, mild climate, anti-contamination wall faucet with 3/4" (19) male hose connection, and anti-siphon vacuum breaker. Exterior finish to be (specify rough brass), operating handle to be (specify brown plastic, clear plastic, cast iron wheel handle or operating key), and inlet connection to be (specify 1/2" (13) or 3/4" (19) F.P.T.). Vacuum breaker to be certified to the A.S.S.E. Standard 1011 and listed by I.A.P.M.O.




		HY-9100 Series Rough Chrome Wall Faucets with Vacuum Breaker (8) Click for specsheet List Prices MIFAB Series HY-9100 exposed type, mild climate, anti-contamination wall faucet with 3/4" (19) male hose connection, and anti-siphon vacuum breaker. Exterior finish to be (specify chrome plated), operating handle to be (specify brown plastic, clear plastic, cast iron wheel handle or operating key), and inlet connection to be (specify 1/2" (13) or 3/4" (19) F.P.T.). Vacuum breaker to be certified to the A.S.S.E. Standard 1011 and listed by I.A.P.M.O.




		HY-9200 Series Polished Chrome Plated Wall Faucets with Vacuum Breaker (8) Click for specsheet List Prices MIFAB Series HY-9200 exposed type, mild climate, anti-contamination wall faucet with 3/4" (19) male hose connection, and anti-siphon vacuum breaker. Exterior finish to be (specify polished chrome plated), operating handle to be (specify brown plastic, clear plastic, cast iron wheel handle or operating key), and inlet connection to be (specify 1/2" (13) or 3/4" (19) F.P.T.). Vacuum breaker to be certified to the A.S.S.E. Standard 1011 and listed by I.A.P.M.O.




		HY-9500 Series Cast Brass Enclosure Box for HY-9000 Series Wall Faucets Click for specsheet List Prices MIFAB Series HY-9500 encased type, mild climate, anti-contamination wall faucet with 3/4" (19) male hose connection, and anti-syphon vacuum breaker complete with flush mounted brass wall box. Exterior finish of the faucet to be (specify brass, chrome plated, or polished chrome plated), operating handle to be (specify brown plastic, clear plastic, cast iron wheel handle or operating key), and inlet connection to be (specify 1/2" (13) or 3/4" (19) F.P.T.). Vacuum breaker to be ...




		Hydrant Boxes (24)




		MI-440 - Roof Drain Stack Flashing Fitting Click for specsheet List Prices Specification: MIFAB® Series MI-440 mild steel stack fitting with counter flashing recess, threaded stack, and extension connections.




		MI-450 Roof Drain Vent Stack Flashing Fitting Click for specsheet List Prices Specification: MIFAB® Series MI-450 mild steel stack sleeve with counter flashing and caulking recesses.




		MI-730 P-Trap with Cleanout Click for specsheet List Prices Specification: MIFAB® Series MI-730 P-Trap shall be made from 17 gauge polished chrome plated brass and shall have a removable clean out plug at the lowest gavitational point of the J-Bend. Shall be designed with slip joints for ease of connection and lock nuts to tighten and hold in place after installation. Function: Designed to collect and hold water at the bottom of the J-Bend to stop the back flow of sewer gas. The device shall come equipped with a wall tube ...




		MI-800 - Female Threaded Eccentric Reducer Bushing Click for specsheet List Prices Specification: MIFAB® Series MI-800 lacquered cast iron female pipe thread eccentric reducer. Function: Used with side outlet connection drains to reduce the outlet connection by one pipe size.




		MI-830 - Cast Iron Hub Adaptors Click for specsheet List Prices Specification: MIFAB® Series MI-830 lacquered cast iron hub adaptor with N.P.T. threaded connection at one end and hub connection at the other. Function: Used to convert a female threaded connection to a hub connection for caulking.




		MI-850 - Cast Iron No Hub Adaptors Click for specsheet List Prices Specification: MIFAB® Series MI-850 lacquered cast iron no hub adaptor with N.P.T. threaded connection at one end and no hub connection at the other. Function: Used to convert a female threaded connection to a no hub connection.




		MI-860 - Cast Iron Elbow Adapters (4) List Prices




		MI-940 - Deep Seal Trap with Funnels (3) Click for specsheet List Prices




		MI-950 - Deep Seal Traps Click for specsheet List Prices Specification: MIFAB® Series MI-950 lacquered deep seal trap with 1/2" trap seal primer tapping and cast iron plug, 3/4" low flushing tapping and bronze plug, and 1 1/4" bottom bronze cleanout plug. Function: Used to maintain the water seal trap underneath bottom outlet drains.




		MI-950-F - Funnel Drain with Deep Seal Traps Click for specsheet List Prices Specification: MIFAB® Series MI-950-F lacquered cast iron deep seal trap with funnel drain, with 1/2" trap seal primer tapping and cast iron plug, 3/4" low flushing tapping and bronze plug, and 1 1/4" bottom bronze cleanout plug. Function: Used with indirect waste lines that are above the floor and require receptors to receive drip, condensate, or waste water in industrial laboratories and hospitals. The deep seal trap prevents sewer gases from entering the ...




		MI-CAG - Cast Iron Fixed Air Gaps Click for specsheet List Prices Specification: MIFAB® Series MI-CAG lacquered cast iron fixed air gap with slip joint inlet and either No-Hub or N.P.T. outlet connection size. Function: Used to protect fixtures from contamination due to back flow in the drain line when installed between the fixture waste outlet and the piping system. Also used to prevent contamination from cross connection between the potable water supply and the fixture that handles a contaminating liquid or one that is ...




		MI-DE - Dielectric Nipples (14) Click for specsheet List Prices Specification: MIFAB Series MI-DE (specify size and connection type) galvanized steel dielectric nipples with plastic liner, tested and certified to the ASTM Standard F492 for continuous use at temperatures up to +225º F, and for pressures up to 425 PSI. Function: Used to protect the plumbing system through the steel to plastic design that provided a dielectric waterway in all potable water and appropriate HVAC applications. Dissimilar metals are separated in the ...




		MI-GAP Brass Trap Seal Primer Air Gap Fitting Click for specsheet List Prices




		MI-GRILL - Fresh Air Inlets Click for specsheet List Prices Specification: MIFAB® Series MI-GRILL nickel bronze fresh air inlet with crowned and perforated round design, assembled with adjustable four point contact locking mechanism and vandal proof screw. Function: Used as a protective cover for the fresh air inlet piping at the exterior walls of buildings to permit fresh air to enter the piping system. It is typical that the diameter of the fresh air inlet must be double the pipe diameter that it is servicing.




		R100 - PVC or ABS Roof Drain with 8" Diameter Flange List Prices 8" Diameter roof drain with PVC or ABS body, lacquered cast iron roofing membrane clamp with internal gravel stop, and self-locking UV stabilized polydome with a free area of 35" square.




		R100-M - Cast Iron Roof Drains with Aluminum Dome




		R100-OF - Cast Iron Roof Drains with Aluminum Dome and Overflow Standpipe (6) List Prices




		R100-90 - Cast Iron Roof Drains with Aluminum Dome and Side Outlet List Prices




		R1800 - Membrane Clamp Lockdown Clamp Click for specsheet List Prices




		SD7000 - Shower Drains Click for specsheet List Prices Shower drain with ABS, or lacquered cast iron body, membrane clamp, adjustable strainer with stainless steel grate. Recommended for molded shower stalls where the drain body is placed on the pipe before the shower unit is installed.




		SW - Cast Iron Sidewalk Boxes with Ductile Iron Covers Click for specsheet List Prices




		RFD - Replacement Roof Drain Click for specsheet Specification: MIFAB Series RFD-(), (specify size) replacement roof drain, fabricated stainless steel bearing pan and funnel body with lacquered cast iron dome, dome reciever and gasket seal. Function:* Used in conjunction with roof renovation projects where existing roof drain bodies cannot be relocated. The RFD-(*) is specifically designed to utilize the existing drain body and fit securely inside of the drain pipe.




		TS1000 - Trap Standards (2) Click for specsheet List Prices Specification: MIFAB Series TS1000 2" to 3" Connection size cast iron white epoxy coated outside and acid resistant coated inside trap standard. Complete with chrome plated strainer, rubber gasket, bronze cleanout plug, and bottom flange. Recommended for use with wall mounted service basins.




		Water Hammer Arrestors Counterline Click for Water Hammer Arrestors Introduction




		MCL-G Series Hydro Mechanical Grease Interceptors Click for specsheet List Prices Regularly manufactured with an electrostatically applied baked powder coating and supplied with an external, vented, flow control fitting. Modifications are not available to dimensions of product. Choose MIFAB's Ml-G Hydro Mechanical Grease Interceptor Series when integral extensions, anchor flanges, and other optional variations are required. MIFAB Series MCL-G 0-7 sanitary powder epoxy coated inside and outside fabricated 14 gauge steel grease interceptor with flow ...




		MCL-G-BO Series Grease Interceptors Click for specsheet List Prices Regularly manufactured with an electrostatically applied baked powder coating and supplied with an external, vented, flow control fitting. Modifications are not available to dimensions of product. Choose MIFAB's MI-G-BO Grease Interceptor Series when integral extensions, anchor flanges, and other optional variations are required. MIFAB Series MCL-G-BO 0-7 sanitary powder epoxy coated inside and outside fabricated 14 gauge steel grease interceptor with flow rating ...




		MCL-G-L Series Hydro Mechanical Grease Interceptors Click for specsheet List Prices Specification: MIFAB Series MCL-G-L sanitary powder epoxy coated inside and outside fabricated 14 guage steel hydro mechanical grease interceptor with flow rating of (indicate) and grease holding capacity of (indicate). Unit shall include: removable baffle assembly and crossbar, securing bolt(s), external vented flow control fitting, internal air releif bypass, feet underneath interceptor to elevate it 1/2" off the ground, and steel powder epoxy coated rectangular gasketed ...




		MI-GO Series - Residential Grease Interceptors with Wrap Around Lid Click for specsheet List Prices




		MI-G-P - Moulded Plastic (HDPE) Hydro Mechanical Grease Interceptors with Steel Traffic Lid Click for specsheet List Prices MIFAB Series MI-G-P sanitary, high density polyethylene (HDPE) hydro mechanical grease interceptor with flow rating of 10-50 gpm and grease holding capacity of 20-100 lbs. HDPE material to be 1/4" (6) thick. Interceptor shall include: removable baffle assembly and cross bar, securing bolt(s), oversized neoprene gasket, external vented flow control fitting, internal air relief by pass and deep seal trap covered by the steel, powder epoxy coated, non skid lid(s), suitable for ...




		MI-ROC Series - Hydro Mechanical Grease Interceptors with 3 Way Outlet and Recessable Lid Click for specsheet List Prices Specification: MIFAB series MI-ROC sanitary acid resistant powder epoxy coated inside and outside. Fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of _____ and grease holding capacity of _____ . Unit shall include: I.P.S. inlet and outlet, cast iron drainage fittings to form a visible double wall deep seal trap, easily removable separator and filter screens, recessed, non skid rectangular gasketed lid for in or above ground use, removable cross bar, ...




		MI-ROC-LO Series - Low Rough-in Grease Interceptors with Recessable Lid Click for specsheet List Prices Specification: MIFAB Series MI-ROC____ sanitary acid resistant powder epoxy coated inside and outside. Fabricated 10 gauge steel grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: F.I.P. inlet and outlet, cast iron drainage fittings to form a visible double wall deep seal trap, easily removable separator and filter screens, recessed, non skid, rectangular gasketed lid for in or above ...