Trench Drains on MIFAB

Access DoorsBackwater ValvesBEECOC-PORT Roof
Pipe SupportsCounterline and Other Products Fabricated Stainless
Steel DrainsFixture Carriers Floor and Area Drains Floor and Wall Cleanouts Floor SinksGrease, Oil and
Specialty InterceptorsNo Hub Couplings Rain Water Harvesting Roof DrainsTrap Seal Primers and
Water Hammer ArrestorsTrench Drains Wall and Ground Hydrants


All Categories > Trench Drains


	Trench Drains
	Click on a category to drill down.

T1000 5" x 20" Stainless Steel Trench Drain Grate with Optional "F" Angle Frame [T1000(-F)]

Click for specsheet

List Prices

T1100 5" x 20" Trench Drain Grate with Optional "F" Angle Frame [T1100(-F)]

Click for specsheet

List Prices

T1150 12" x 12" Trench Drain Grate with Optional "F" Angle Frame [T1150(-F)]

Click for specsheet

List Prices

MIFAB Series T1150-F - 12" (305) wide x (specify length) long ductile iron trench drain grate with angle iron frame. Grates to have maximum 3/8" (10) openings. Supply in sections as indicated on drawings.

T1200 12" x 24" Trench Drain Grate with Optional "F" Angle Frame [T1200(-F)]

Click for specsheet

List Prices

MIFAB Series T1200-F-4 12" wide steel frame and grate system. Lacquered 1 7/8" x 1 7/8" x 1/4" welded angle iron steel frame with anchor tabs located every 20" for anchoring support. Standard 24" long, ANSI rated "Special Duty" lacquered ductile iron heel proof grates with a safe live load of over 10,000 lbs.

T1200-F2 24 1/2" x 24 1/2" Trench Drain Grate and Frame Assembly

Click for specsheet

List Prices

MIFAB Series T1200-F2-4 24" wide steel frame and grate system. Lacquered 1-7/8" x 1-7/8" x 1/4" welded angle iron steel frame with anchor tabs located every 20" for anchoring support. Standard 12" long ANSI rated "Special Duty" lacquered ductile iron heel proof grates with a safe live load of over 10,000 lbs.

T1320-FL - 6" Wide Trench Drain System

Click for specsheet

List Prices

Part Number Configurator
Specification: MIFAB® T1320-FL Series 6" wide modular trench drain with lacquered cast iron body sections, bottom outlet, and anchor flange. Assembled in 20" long module sections with standard ANSI rated "Special Duty" lacquered ductile iron grates with a safe live load of over 10,000 lbs.
Function: Used in washdown areas, loading, and parking areas. Can also be used in small sections as an area drain.

T1330-FL-FAB - 6" Wide Trench Drain for Suspended Applications

Click for specsheet

List Prices

Specification: MlFAB® T1330-FL-FAB Series 6" wide fabricated trench drain with powder epoxy coated 10 gauge steel presloped (1/8" slope per foot) body sections, outlet (specify bottom or end and connection type), and 3" wide anchor flange set below the top of the drain (2 3/4" (Standard) or specified per application). Complete with ANSI rated "Special Duty" lacquered 5" x 20" long ductile iron grates with a safe live load of over 10,000 lbs. (lock downs are ...

T1330-FL-FAB-TH - 6" Wide Trench Drain System

Click for specsheet

List Prices

Specification: MIFAB® T1330-FL-FAB-TH Series, 6" wide fabricated trench drain with powder epoxy coated 10 gauge steel presloped (1/8" slope per foot) custom length body sections, outlet (specify size), and 3" wide anchor flange set below the top of the drain or specified per application. Complete with ANSI rated "Special Duty" lacquered 6" x 24" long ductile iron grates with a safe live load of over 10,000 lbs.
Function: Used in car washes, ...

T1350-FL - 12" Wide Trench Drain System

Click for specsheet

List Prices

Part Number Configurator
Specification: MIFAB® T1350-FL Series 12" wide modular trench drain with lacquered cast iron body sections, bottom outlet, and anchor flange. Assembled in 12" long module sections with standard ANSI rated "Special Duty" lacquered ductile iron grates with a safe live load of over 10,000 lbs.
Function: Used in washdown areas, loading, and parking areas. Can also be used in small sections as an area drain.

T1360-FL-FAB - 12" Wide Trench Drain for Suspended Applications

Click for specsheet

List Prices

Specification: MIFAB® T1360-FL-FAB-TH Series, 12" wide fabricated trench drain with powder epoxy coated 10 gauge steel presloped (1/8" slope per foot) custom length body sections, outlet (specify size), and 3" wide anchor flange set below the top of the drain or specified per application. Complete with ANSI rated "Special Duty" lacquered 12" x 12" long ductile iron grates with a safe live load of over 10,000 lbs.
Function: Used in car washes, loading ...

T1360-FL-FAB-TH - 12" Wide Trench Drain System

Click for specsheet

List Prices

T1400 - 6" Wide Polypropylene Trench Drain System

Click for specsheet

List Prices

Specification: MIFAB Series T1400 6” wide pre-sloped trench drain system. Polypropylene drain body with integral top frame and 1/4" per section bottom slope, anchor flange with slotted tabs every 10” for rebar tie down and leveling, grate lockdown assembly, body support legs, interlocking ends, and radiused bottom. Standard with ANSI rated “Special Duty” lacquered ductile iron grates with a safe live load of over 10,000 lbs. (Note: Specify ductile iron ...

T1400-CB620 - 6" x 20" Catch Basin

Click for specsheet

List Prices

Part Number Configurator
Specification: MIFAB® Series T1400-CB620 6" wide x 20" long x 21" deep catch basin. Polypropylene body with integral top frame, anchor flange, grate lockdown assembly, interlocking ends, and radiused bottom. Standard with ANSI rated "Special Duty" lacquered ductile iron heel proof grates with a safe live load of over 10,000 lbs.
Function: Used in airports, car washes, malls and plazas, golf courses, factories, and any other ...

T1400-CB1224 - 12" x 24" Catch Basin

Click for specsheet

List Prices

Part Number Configurator
Specification: MIFAB® Series T1400-CB1224 12" wide x 24" long x 21" deep catch basin. Powder epoxy coated with integral top frame, anchor flange, Standard with ANSI rated "Heavy Duty" lacquered ductile iron grate with a safe live load of over 10,000 lbs.
Function: Used in airports, car washes, malls and plazas, golf courses, factories, and any other facilities that require large areas of surface drainage. Typically ...

T1400 Grates

T2000 - 12" Wide Polypropolene Trench Drain System

Click for specsheet

List Prices

Part Number Configurator
Specification: MIFAB® T2000 Series 12" wide pre-sloped trench drain system. Polypropolene drain body with integral top frame and 0.5% per section bottom slope, anchor flange with slotted tabs every 15.5" for rebar tie down and leveling, grate lockdown assembly, body support system, interlocking ends and radiused bottom. Standard with ANSI rated "Special Duty" lacquered ductile iron grates and a galvanized steel frame with a safe live load of ...

P6012 - Heavy Duty 1 1/2" Wide Stainless Steel Trench Drain

Click for specsheet

Specification: MIFAB Series P6012 1-1/2” wide heavy duty trench drain constructed of 14 gauge, Type 304 stainless steel complete with anchor tabs and squared bottom body and 14 gauge Type 304 stainless steel grates. Free area of 6.0 square inches per 3’ section. Standard with ANSI rated “Medium Duty” slotted Type 304 stainless steel grates with a load rating of 2,000 to 4,999 lbs. Also available in a anchor flange model (-FL) in which the anchor flange incorporates a “hemmed” design in which the flange is folded over and pressed formed ...

P6030 - Heavy Duty 3" Wide Stainless Steel Trench Drain with Optional "FL" Anchor Flange [P6030(-FL)]

Click for specsheet


Without Flange	With Flange

MIFAB Series P6030 3" wide heavy duty trench drain constructed of 14 gauge, Type 304 stainless steel complete with anchor tabs, radiused bottom, and 1/8" slope per 1' of length body. Free area of ...

P6060 - Heavy Duty 6" Wide Stainless Steel Trench Drain with Optional "FL" Anchor Flange [P6060(-FL)]

Click for specsheet


Without Flange	With Flange

MIFAB Series P6060 6" wide heavy duly trench drain constructed of 14 gauge, Type 304 stainless steel complete with anchor labs and radiused bottom body, and 7 gauge (3/16") Type 304 stainless ...

P6120 - Heavy Duty 12" Wide Stainless Steel Trench Drain with Optional "FL" Anchor Flange [P6120(-FL)]

Click for specsheet


Without Flange	With Flange

MIFAB Series P6120 12" wide heavy duty sectional trench drain constructed of 14 gauge, Type 304 stainless steel body complete with anchor flanges, radiused bottom, and 1/8" slope per 1' of length. ...

P6230 - Heavy Duty 3" Wide Stainless Steel Trench Drain Grate and Frame [P6230(-FL)]

Click for specsheet

MIFAB Series P6230 3" wide heavy duty slotted trench grate constructed of 10 gauge, Type 304 stainless steel with 1" x 1" x 3/16" stainless steel angle frame. Free area of 20" square per 3' section. Standard with ANSI rated "Heavy Duty" slotted Type 304 stainless steel grates with a load rating of 5,000 to 7,500 lbs.

P6260 - Heavy Duty 6" Wide Stainless Steel Trench Drain Grate and Frame [P6260(-FL)]

Click for specsheet

MIFAB Series P6260 6" wide heavy duty slotted trench grate contracted of 3/16" (7 gauge), Type 304 stainless steel with 1 1/2" x 1 1/2" x 1/4" stainless steel angle frame. Free area of 46.56" square per 3' section. Standard with ANSI rated "Heavy Duty" slotted Type 304 stainless steel grates with a load rating of 5,000 to 7,500 lbs.

P6290 - Heavy Duty 12" Wide Stainless Steel Trench Drain Grate and Frame with Optional "FL" Anchor Flange [P6290(-FL)]

Click for specsheet

MIFAB Series P6260 12" wide heavy duty slotted trench grate constructed of 3/16" (7 gauge), Type 304 stainless steel with 1 1/2" x 1 1/2" x 1/4" stainless steel angle frame. Free area of 21" square per 1' section. Standard with ANSI rated "Heavy Duty" slotted Type 304 stainless steel grates with a load rating of 5,000 to 7,500 lbs.

Stainless Steel Trench Drain Accessories